Home > Shop > Turning
Sort By:
Page of 1
Kit #1 1/4 inch Turning (T) Kit #10 1/2 inch Turning (C) Right Hand Kit #11 1/2 inch Turning (C) Right Hand Left Hand
1/4 inch Turning
Contents:
5 bars 1/4 inch shank 3.50 inches overall length

6 T-15 High Speed Steel TPMW 1.8-1.5-1 inserts

Relief : 11 degree
IC: .218 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .015 inch

Wrench: T-7


Contents:
1 Turning bar 1/2 inch shank 4.0 inches overall length

3 Inserts (Turning) T-15 High Speed Steel CCMW 3-2.5-2
Relief : 7 degree
IC: .375 inch
Thickness: .156 inch
Hole: .173 inch Top opening: .236 inch
Radius: .031 inch

Screws: (2) MS-1155

Wrench: T-15
Contents:
1 Right Hand Turning bar 1/2 inch shank 4.0 inches overall length
1 Left Hand Turning bar 1/2 inch shank 4.0 inches overall length
Note: this bar is double ended for 50 degree side cutting edge angle (uses 3rd and 4th edge of inserts)


5 Inserts (Turning) T-15 High Speed Steel CCMW 3-2.5-2
Relief : 7 degree
IC: .375 inch
Thickness: .156 inch
Hole: .173 inch Top opening: .236 inch
Radius: .031 inch

Screws: (4) MS-1155

Wrench: T-15
Kit #15 35 Degree  Profile (V) Right Hand Kit #16 35 Degree  Profile (V) Right Hand Left Hand Kit #2 1/4 inch Turning (C) Right Hand
Contents:
1 Right Hand bar 3/8 inch shank 6.0 inches overall length
Side angle: 3 degree
2 Inserts T-15 High Speed Steel VCMW 221
Relief : 7 degree
IC: .250 inch
Thickness: .125 inch
Hole: .110 inch Top opening: .146 inch
Radius: .015 inch
1 Insert Carbide VCMT 221
Relief : 7 degree
IC: .250 inch
Thickness: .125 inch
Hole: .110 inch Top opening: .146 inch
Radius: .015 inch

Screws: (2) MS-1153

Wrench: T-7
Contents:
1 Right Hand bar 3/8 inch shank 6.0 inches overall length
Side angle: 3 degree
1 Left Hand bar 3/8 inch shank 6.0 inches overall length
Side angle: 3 degree
3 Inserts T-15 High Speed Steel VCMW 221
Relief : 7 degree
IC: .250 inch
Thickness: .125 inch
Hole: .110 inch Top opening: .146 inch
Radius: .015 inch
1 Insert Carbide VCMT 221
Relief : 7 degree
IC: .250 inch
Thickness: .125 inch
Hole: .110 inch Top opening: .146 inch
Radius: .015 inch

Screws: (3) MS-1153

Wrench: T-7
Contents:
1 bar 1/4 inch shank 3.50 inches overall length

3 Inserts T-15 High Speed Steel CCMW 2-1.5-1
Relief : 7 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .015 inch
Screws: (2) MS-1153
Wrench: T-7
Kit #3 1/4 inch Turning (C) Right Hand  and Boring Bar Kit #33 3/4 inch Turning (T) Kit #4 1/4 inch Turning (C) Right Hand Left Hand and Boring Bar
1/4 inch Turning (C) Right Hand
Contents:
1 Turning bar 1/4 inch shank 3.50 inches overall length
1 Boring bar 3/8 inch shank 5.0 inches overall length

2 Inserts (Turning) T-15 High Speed Steel CCMW 2-1.5-1
Relief : 7 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .015 inch
Wrench: T-7
Screws: MS-1153

2 Inserts (Boring) T-15 High Speed Steel CEMW 2-1.5-.5
Relief : 20 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .008 inch

Screws: CO-2205 S
Contents:
3 Turning bars 3/4 inch shank 4.5 inches overall length

4 Inserts (Turning) T-15 High Speed Steel TPMB 433
Relief : 11 degree
IC: .500 inch
Thickness: .188 inch
Hole: .125 inch Top opening: . inch
Radius: .047 inch

Screws: (4) 8-32FH

Wrench: 3/32 Hex
Contents:
1 Right Hand Turning bar 1/4 inch shank 3.50 inches overall length

1 Left Hand Turning bar 1/4 inch shank 3.50 inches overall length
Note: this bar is double ended for 50 degree side cutting edge angle (uses 3rd and 4th edge of inserts)

1 Boring bar 3/8 inch shank 5.0 inches overall length

3 Inserts (Turning) T-15 High Speed Steel CCMW 2-1.5-1
Relief : 7 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .015 inch

Screws: (4) MS-1153

2 Inserts (Boring) T-15 High Speed Steel CEMW 2-1.5-.5
Relief : 20 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .008 inch

Screws: (2) CO-2205 S

Wrench: T-7
Kit #5 3/8 inch Turning (T) Kit #8 3/8 inch Turning (C) Right Hand Left Hand and Boring Bar Kit #9 1/2 inch Turning (T)
Contents:
5 Turning bars 3/8 inch shank 3.50 inches overall length

6 Inserts (Turning) T-15 High Speed Steel TPMW 222
Relief : 11 degree
IC: .250 inch
Thickness: .125 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .031 inch

Screws: (6) MS-1153

Wrench: T-7
1 Right Hand Turning bar 3/8 inch shank 3.50 inches overall length
1 Left Hand Turning bar 3/8 inch shank 3.50 inches overall length
Note: this bar is double ended for 50 degree side cutting edge angle (uses 3rd and 4th edge of inserts)
1 Boring Bar 3/8 inch shank 5.0 inches overall length
Minimum Bore: .330 inch


3 Inserts (Turning) T-15 High Speed Steel CCMW 2-1.5-1
Relief : 7 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch @ 60 degrees
Radius: .015 inch

Screws: (3) MS-1153

2 Inserts (Boring) T-15 High Speed Steel CEMW 2-1.5-.5
Relief : 20 degree
IC: .250 inch
Thickness: .093 inch
Hole: .110 inch Top opening: .146 inch
Radius: .008 inch

Screws: (2) CO-2205 S

Wrench: T-7
Contents:
5 Turning bars 1/2 inch shank 4.0 inches overall length

6 Inserts (Turning) T-15 High Speed Steel TPMB 322 (TD6P)
Relief : 11 degree
IC: .375 inch
Thickness: .125 inch
Hole: .150 inch Top opening: .250 inch
Radius: .031 inch

Screws: (6) 4-40FH

Wrench: 1/16 Hex